Bold eyelashes are a fantastic way to emphasize and embellish any look, but it might be challenging if your natural lashes aren’t very long. However, individual lashes can keep a natural appearance while lengthening and volumizing your natural lashes. Even if applying individual lashes may take some time, the outcome is worthwhile!
Source: EMAN
Step-by-step procedure to individually apply lashes professionally
1. Clean up.
Before you proceed to apply your lashes, it is advisable to wash your hands with soap and water before touching your face to reduce the chance of contracting an illness with whatever instruments you’re holding, like your tweezers.
2. Review the directions.
Brand to brand can differ in the specific stages. To apply and utilize the product correctly, check through and read the directions and be sure to always abide by their directions.
3. Plan your placement.
Your falsies can be applied above or below your lash line, depending on the appearance you’re going for. Additionally, remember that each lash varies in length, so arrange the lashes to highlight the contour of the eyes (e.g., longer lashes in the middle and shorter lashes in the corners).
4. Set up the eyelash glue.
Please pick up the lash with your applicator, and using a cotton swab or by placing a small drop of glue on a clean spot and dipping the base into it, add a thin coating of adhesive to the end. Be cautious against over-dipping because it could result in a thicker adhesive layer that takes longer to dry and may be easier to spot while applying false eyelashes. Then, wait 5-15 seconds or until the glue becomes tacky, fan the lashes to increase the drying process.
5. Use the first set of lashes.
Deliberately lay your first lash near the center of your eyelids, touching your lash line with your eye slightly open so you can view the top lash line. Start by looking in the mirror. After applying the initial false eyelash, use your tweezers to stroke your natural lashes in the direction of one another to help blend them, advises Magno. To insert both “anchor” lashes, proceed with the center lashes on the opposite eye.
6. Add extra eyelashes.
Until you obtain the desired look, keep adding lashes to the inner and outer corners of the lash line. If you make a mistake (which you almost certainly will, especially if it’s your first time), you can remove the lash and any remaining glue using makeup or lash remover.
7. Making final adjustments.
You can apply eye makeup when the adhesive has had time to dry, which usually takes 10-20 minutes. You can gently push the artificial and natural lashes together with a tweezer, your fingertips, or an eyelash curler to aid in blending and ensure placement. Apply mascara to your new lashes next, and use black eyeliner to cover any visible glue residue.
